Oki B4300 User Manual
Also see for B4300n: Configuration guideUser manualInstructionsInstallation instructionsSetup guide
                                                                                                                        | |
Contents
| 
Troubleshooting 114If printing with FTP, the User name printed is the User name enteredduring FTP login and the File name printed is the Transmitted file name.If the Print Directory name is indicated in the put command, the File nameis not printed. The Printer name printed is the Logical Directory name.NetWarePrinter cannot find the network print server.Turn the printer off and on again.Confirm the network interface is enabled on the printer.Check the network cable is correctly connected.Change the cable and try again.If the standard configuration utility is used, check the NetWare networknumber in the environment settings.If the NetWare protocol is disabled, set it to Enable.Reset the network interface card to factory default settings.The network print server is identified by the setup utility but not bythe NetWare server.Start up the NetWare server and check the NIC configuration.Check the NSAP packet on the NetWare server is not set to Disable.Remote Server modeCheck the correct print server is operating on the file server.Check the Print Server name operating on the File Server and the PrintServer name set in the NIC are the same.Check the Printer name displayed in the Print Server monitor of the FileServer and the NetWare Port name set in the NIC are the same. If there aremultiple network interface cards, configure the NetWare Port names to bedifferent. |
Related manuals for Oki B4300n
manualsdatabase
Your AI-powered manual search engine