- 132 -6. TroubleshootingIf an Error Message is Displayed on the Operator PanelIf an error occurs in this machine, an error message and/or an error code (a 3-digit number)is displayed on the touch panel and (STATUS) on the operator panel blinks or lights up.Press [Details] and clear the error following the onscreen instructions.• Error Message ListError Message ListWait a moment. Network initializing ...The network is being initialized.Wait for a while until the machine connects to the network.Checking File SystemFile system in the hard disk is being checked. Wait for a while.Inspection is required. PU Flash ErrorTurn the machine off, and then back on. If the same error occurs, contact your dealer.Inspection is required. PU Communication ErrorTurn the machine off, and then back on. If the same error occurs, contact your dealer.Offline ModePress [Print] > [Online] on the touch panel. The (STATUS) button turns off when the machine turns online.Data present.Data remains unprinted. Wait for a while and if the message does not disappear, check the data.Deleting data.The job was cancelled or user is unauthorized. Wait for a while.Warming up.The machine is adjusting the temperature of the fuser unit. Wait for a while.Preparing ...Color registration and density are being adjusted. Wait for a while.
