- 42 -2. Setting UpConnecting to a Wireless LAN (Only When the WirelessLAN Module is Mounted)• Before Connecting to a Wireless LAN• Enabling Wireless LAN Connection• Connecting to an Access Point (Infrastructure)• Connecting to the Machine Directly• Wireless(Infrastructure) and Wireless(AP Mode) cannot be enabled at the same time.• If the machine is used in a wireless network environment, the machine does not enter Deep Sleep mode but entersSleep mode.• Do not place any electric products that emit weak radio waves (such as microwaves or digital cordless telephones)close to the machine.• The communication speed of a wireless LAN connection may be slower than that of a wired LAN or USB connectiondepending on the environment. If you want to print big data such as a photo, it is recommended to print with a wiredLAN or USB connection.Connecting to an Access PointConnect this machine to a network via a wireless LAN access point.1 Check if your wireless LAN access point matches the following requirements.Standards: IEEE 802.11 a/b/g/nAccess method: Infrastructure modeBefore Connecting to a Wireless LAN
