- 74 -3. Basic Operations• Entering with the Touch Panel• Entering with the Numeric KeypadEntering with the Touch PanelWhen you need to enter characters while you are setting an item, the following entry screenis displayed.You can enter uppercase and lowercase alphabets, numbers, and symbols.• About the entry screenThe number of buttons in the entry screen differs depending on the input.The QWERTY keyboard set by default can be switched to the AZERTY keyboard. To switch to the AZERTY keyboard,select [Manage Unit] > [Keyboard Layout] > [AZERTY] on the touch panel.• Entering Characters1 Press the touch panel.2 When the entry is complete, press [OK] or [Next].To enter a diacritical mark, press and hold a character button with [...] shown. When a diacritical mark appears, pressthe character you want to enter.The screen below shows an image when holding down the "a" button.Entering CharactersItem Description1 Text entry field Displays the entered characters.2 The number of entered characters/themaximum number of characters thatcan be enteredIndicates the maximum number of characters that can be enteredand the number of entered characters.3 Back Space button Deletes a character just before the cursor.4 Character panel Enters characters.The character type switches depending on the entry mode.5 Left button/right button Moves the cursor left and right.6 Capital Lock Switches between the uppercase and lowercase characters.7 Entry mode button Switches the entry mode (types of characters) for entering text.Item Description
