41316401TH Rev.9 88 /Oki Data CONFIDENTIAL3.1.3.1 Short plug settingsThe SWA board has two short plugs that can be set as follows:Short Plug (WE1)Sets flash ROM DIMM to connect WE signals.(1-2 Short: Disconnects WE signals; 2-3 Short: Connects WE signals.)Factory 2-3 Short Setting: Re-programmable flash ROM DIMM.Short Plug (WE2)(Not use)3.1.3.2 Printings singly using controller-equipped printerMenu Map PrintingThe program versions, the controller block configuration and other configurations and settingsof the printer are printed.Operation: (Press of Switches)Without HDD: “0” → “3” → “3”With HDD: “0” → “0” → “3” → “3”File List PrintingA list of files stored on a HDD or in ROM is printed.Operation: (Press of Switches)Without HDD: “0” → “3” → “1” → “3”With HDD: “0” → “0” → “3” → “1” → “3”Font List Printing (PCL)A list of PCL fonts is printed.Operation: (Press of Switches)Without HDD: “0” → “3” → “1” → “1” → “3”With HDD: “0” → “0” → “3” → “1” → “1” → “3”Font List Printing (PS)A list of PS fonts is printed.Operation: (Press of Switches)Without HDD: “0” → “3” → “1” → “1” → “1” → “3”With HDD: “0” → “0” → “3” → “1” → “1” → “1” → “3”Demo PrintingThe demo patterns for destinations stored in ROM are printed.Operation: (Press of Switches)Without HDD: “0” → “3” → “1” → “1” → “1” → “1” → “3”With HDD: “0” → “0” → “3” → “1” → “1” → “1” → “1” → “3”Ethernet Board Self-Diagnostic PrintingWhen the printer is equipped with an Ethernet board, holding down the SW on the Ethernetboard for two seconds or more runs self-diagnostics and prints its result.
