41316401TH Rev.9 91 /Oki Data CONFIDENTIAL3.3 Color Balance AdjustmentColor balance has been adjusted appropriately when a printer is shipped from the plant. However,it may be out of the appropriate balance during use. In such a case, color balance should bemodified.Note: Density of each color depends on each other. Therefore, adjustment must be repeatedseveral times to reach the correct color balance.(1) Set A4 papers in the tray specified on the operator panel.(2) Press ))))) several times to display [COLOR MENU].(3) Press 11111 or 55555 to display [COLOR BALANCE CORRECTION/PATTERN PRINT].(4) Press 33333 to start test printing.(5) Press 11111 to display [COLOR BALANCE CORRECTION/RESET].(6) Choose the number of the color closest to the [(] part on the test pattern.If the selected color is [00], the color balance is correct and no adjustment is required.If it is not [00], the color balance should be adjusted in the procedures below.(7) Press 22222 or 66666 several times to display the value selected in Step (6).(8) Press 33333 to start test printing.(9) Repeat the steps (6)~(8) to approximate the color at the [(] part on the test pattern to [00]as much as possible.(10) Press 44444 to display [ON LINE].
