44015503TH Rev. 1 149 /Oki Data CONFIDENTIAL 5. MAINTENANCE MENUS5.6 Boot Menu ListTo display Boot Menu, turn on the printer while holding down the Set ( ) button.Memo Displaying Boot Menu requires entry of a password. The password defaults tosix as (aaaaaa).Category Option Settings FunctionEnterPassword************ Enters a password to display Boot Menu. Thepassword is six to twelve digits or lower-casealphanumeric characters and defaults to six as(aaaaaa).ParallelSetupParallel EnableDisableSets whether to enable or disable the parallelinterface.Bi-Direction EnableDisableSets whether to make the parallel interface bi-directional or not.ECP EnableDisableSets whether to enable or disable the ECP mode.Ack Width NarrowMediumWideSets the compatible-reception ACK width.NARROW: 0.5 μsMEDIUM: 1.0 μsWIDE: 3.0 μsAck/BusyTimingAck in BusyAck while BusySets the order of outputting compatible-receptionBUSy and ACK signals.I-Prime 3 microseconds50 microsecondsDisableSets an I-PRIME signal valid time period ordisable I-Prime signals.OfflineReceiveEnableDisableSets whether to enable or disable the functionalitythat maintain a state ready for reception withoutchanging interface signals even when an alarm isissued.Category Option Settings FunctionUSBSetupUSB EnableDisableSets whether to enable or disable the USBinterface.Speed 480Mbps12MbpsSets the maximum USB interface transmissionspeed.Soft Reset EnableDisableSets whether to enable the Soft Reset command.OfflineReceiveEnableDisableSets whether to enable or disable the functionalitythat maintain a state ready for reception withoutchanging interface signals even when an alarm isissued.SerialNumberEnableDisableSets whether to enable or disable the USB serialnumber.SecuritySetupJobLimitationOffEncrypted JobRestricts jobs to accept, i.e. sets whether toaccept only encrypted authentication jobs. Thisoption is displayed when an optional internal harddisk is installed.Reset CipherKeyExecute Reproduces an encrypted key used for a securityhard disk. When an optional internal hard disk isinstalled and the security hard disk functionality isenabled, this option is displayed.StorageSetupCheck FileSystemExecute Resolves a mismatch between the actual(available) and displayed available space of thefile system and restores management data (FATinformation).Check AllSectorsExecute Restores improper HDD sector information andcorrects a mismatch between the actual anddisplayed available space of the file system.Enable HDD NoyesWhen set to NO, deeming the printer with noHDDs irrespective of whether an HDD is installedon it, starts the printer when the printer cannot bestarted due to HDD damage.Erase HDD Execute Erases all data stored on an HDD so as that itcannot be restored. This option is displayed whenan optional internal hard disk is installed.EnableInitializationNoyesDisables changes made about the internal harddisk and flash memory, involving initialization.
