44072903TH Rev.1 117 /Oki Data CONFIDENTIAL 5. MENTENANCE MENUS5.3 Functions of user's maintenance menu5.3.1 Maintenance menu (For end users)There is a maintenance menu category among the normal menu categories. (Different fromthe system maintenance menus)The items that can be set under this menu are indicated below.Maintenance MenuValues in shaded areas are initial settings.Category Operator Panel Display FunctionItem (UpperDisplay)Value (LowerDisplay)Mainte-nanceMenuMENU RESET EXECUTE Resets EEPROM of CU. Restore the usermenu setting to the factory default.Selecting "Execute" of the menu exits themenu.Save MENU EXECUTE Saves the current setting menu.The menu lastly executed is saved and theprevious menu is deleted and overwritten.By pressing the Enter switch, the followingconfirmation message is displayed.ARE YOU SURE?YES/ NOIf NO is selected, the screen is returned tothe previous menu.If YES is selected, the current menu settingis saved and the menu is exited.RESTOREMENUEXECUTE Changes menu settings to stored ones.By pressing the Enter switch, the followingconfirmation message is displayed.ARE YOU SURE?YES/ NOIf NO is selected, the screen is returned tothe previous menu.If YES is selected, the menu is changed tothe stored menu setting, and the menu isexited.* When executing under print data exists,the execution is not performed.Category Operator Panel Display FunctionItem (UpperDisplay)Value (LowerDisplay)Mainte-nanceMenuPOWER SAVE ENABLEDISABLESets Power Save mode Enabled/disabled.Shift time to enable Power Save mode canbe changed using"POWER SAVE TIME" on "SYSTEMCONFIG. MENU".PAPER BLACKSET0+1+2-2-1Corrects print nonuniformity due totemperature variation. With faded images,change the value.With scattering or snowing images in printoutput of high print density, decrement thevalue. With faded images in print output ofhigh print density, increment the value.PAPER COLORSET0+1+2-2-1Corrects print nonuniformity due totemperature variation. With faded images,change the value.With scattering or snowing images in printoutput of high print density, decrement thevalue. With faded images in print output ofhigh print density, increment the value.TRNSPRBLACK SET0+1+2-2-1Used to correct dispersion of printing due totemperature difference. Change the value ifa printed transparency film is blurred.If an output shows a scattered- or snowing-like phenomenon in a high-density print part,decrement the value. If an output is blurred,increment the value.TRNSPRCOLOR SET0+1+2-2-1Used to correct dispersion of printing due totemperature difference. Change the value ifa printed transparency film is blurred. If anoutput shows a scatteredorsnowing-like phenomenon in a high-densityprint part, decrement the value. If an outputis blurred, increment the value.This menu is not displayed for Japaneseproducts
