44072903TH Rev.1 119 /Oki Data CONFIDENTIAL 5. MENTENANCE MENUS5.3.2 Self-diagnostic modeIndividual explanation of LEVEL0 and LEVEL1.5.3.2.1 Operator panelThe explanation of the operations relating to the self-diagnosis presupposes, the followingoperation panel arrangement is required.Self-diagnosticmode layout(Overall)(1) Transition of menu itemsLevel transition is possible only when a part is displayed.Transition of is activated with or buttom.XXXXXXXXXXLEVEL1-ENGINE DIAG MODE XX.XXSWITCH SCANMOTOR & CLUTCH TESTTEST PRINTREG ADJUST TESTDENS ADJ TEST 2CONSUMABLE STATUSPRINTER STATUSFACTORY MODE SETSENSOR SETTINGLED HEAD DATAPOWER ONNormal operation modePress both thebutton and [online]button at the sametime (3 sec.)Press the button,button, andEnter, and BACKbutton simultaneously(6sec.)Not pressedHold down or , until the systemmaintenance menu is displayed. Then, selectENGINE DIAG MODE and press [ENTER].LEVEL0(1) Switchover of menu itemsThe transition of xxxxx is activated when [BACK] or [ONLINE]is pressed and held down, or or buttom is pressedbriefly.The transition of xxxxx is activated with or buttom. Th e item selection screen is restored when [BACK] is pressedand held down.XXXXXXXXbuttom*1: A color is changed by pressing the [CANCEL] key while it is indicated.Toner sensorToner sensorstatusmonitoringindication[BACK](2seconds)[ONLINE](2seconds)buttomLEVEL0-engine status indicationEngine status indication(Heater temperature)(Environmental temperature& humidity indication)Indication of each voltage(TR, CH, DB, SB) duringprintingToner sensorRFID internal noisemonitoringError detailEngine status indicationHeater temperatureEnvironmental temperature& humiditySetup tableTransfer voltageToner sensorTransfer-OFF voltage *BelttemperatureSide ThermistorError detailError code indication, etc.Indication of eachvoltage duringprintingTransfer (TR)voltage(1)*1Transfer (TR)voltage(2)*1Charge (CH) voltageSupply (SB) voltageDevelopment (DB)voltageEnvironmental levelMotor control evaluatingfunctionsRegist Motor Constant-SpeedTimer Value/ EnvironmentalTemperatureFusing Motor Constant-Speed Timer Value/ FusingTarget TemperatureID Motor Constant-SpeedTimer ValueBELT Motor Constant-SpeedTimer Valuebuttombuttom