TROUBLESHOOTING > 171PRINTOUT IS GARBLED OR INCORRECTWITH PARALLEL CONNECTION.CANNOT PRINT.LPT write error displayed.LPT write error displayed.LPT write error displayed.LPT write error displayed.PRNUSBx write error is displayed.PRNUSBx write error is displayed.PRNUSBx write error is displayed.PRNUSBx write error is displayed.Configurationprocedure was notcorrectly followed orcancelled.Configure again from the beginning.USB cable isdisconnected or faulty.Reconnect or try another cable.A USB hub is beingused.Test by connecting the printer and computer directly.Possible cause RemedyPossible mismatch onparallel connectionbetween computer andprinter.Change parallel transmission mode (see ParallelTransmission Mode above).Possible cause RemedyInterface is disabled. In the printer menu settings, enable Parallel or USBinterface.Printer is switched OFF. Switch ON.Printer interface cable isdisconnected.Reconnect the printer interface cable.A converter, buffer,extension cable or USBhub is being used.Test by connecting printer and computer directly.Printer driver output portis incorrect.Set correct output port to which the printer interface cableis connected.Printer is not selected inthe printer driver.Select the printer or set to default printer.Incorrect printer driver isbeing used.Delete this printer driver and install correct printer driver.Possible cause Remedy
