SETTING UP > 60IEEE1394 menu(only displayed if IEEE 1394 is installed)Network menuItem Value DescriptionSPEED S100; S200; S400 Sets the upper limit of transfer speedin communication layer.(S400: 400MB/Sec. or less)Display is in English only.SBP2 Enable; Disable Enables/disables SBP2 protocol.Item Value DescriptionTCP/IP Enable; Disable Selects TCP/IP protocol.NETWARE Enable; Disable Selects Netware protocol.ETHERTALK Enable; Disable Selects EtherTalk protocol.NETBEUI Enable; Disable Selects NetBEUI protocol.FRAME TYPE Auto; 802.2; 802.3Ether-II; snapSelects Ethernet frame type.DHCP/BOOTP Enable; Disable Selects whether selection of DHCP/BOOP is automatic.RARP Enable; Disable Selects whether selection of RARP isautomatic.IP ADDRESS xxx.xxx.xxx.xxx Configures IP address of 12alphanumeric characters.SUBNET MASK xxx.xxx.xxx.xxx Configures subnet mask of 12alphanumeric characters.GATEWAYADDRESSxxx.xxx.xxx.xxx Configures gateway address of 12alphanumeric characters.PRINT SETTINGS ON; OFF Selects printing of network menu map.INITIALISE ON; OFF Selects network initialisation.
