SETTING UP > 54PCL emulationItem Value DescriptionFONT SOURCE Resident; Dimmo;DownloadedSelects location of the PCL font used.DimmoDimmoDimmoDimmo is displayed only when fontDIMM ROM exists in the slot.DownloadedDownloadedDownloadedDownloaded only appears if fontshave been down loaded to the printer.FONT NO. I000 to 1083 Sets the PCL font number.The range of this variable changesdepending on the FONT SOURCEsetting at the time. If the default fontis set for FONT SOURCE, the numberstarts at 0. If it is not, the numberstarts at 1. The maximum value isequal to the number of fonts installedin FONT SOURCE.FONT PITCH 0.44 cpi to 99.99 cpi(10.00 cpi)Sets the font width in characters perinch. Only displayed if the font is afixed spacing outline font.FONT HEIGHT 4.00 pt to 999.75 pt(12.00 pt)Sets the font point size. Onlydisplayed if the font is a relativespacing outline font.SYMBOL SET PC-8 Selects a PCL character symbol setA4 PRINT WIDTH 78 column; 80 column Selects the number of characters in aline before automatic return (A4paper), PCL mode.WHITE PAGE SKIP OFF; ON Selects whether or not to print pagesthat contain no data (white pages),PCL mode.CR FUNCTION CR; CR+LF Sets functionality on receipt of CRcode in PCL mode.LF FUNCTION LF; LF+CR Sets functionality on receipt of LFcode in PCL mode.PRINT MARGIN Normal; 1/5 inch; 1/6inchSets unprintable paper area (margin).Normal: PCL emulation compatible1/5 inch: domestic model emulation.1/6 inch: HIPER-W emulation.TRUE BLACK ON; OFF PCL: Sets whether to use CompositeBlack (CMYK mixed) or Pure Black (Konly) for the black (100%) in imagedata. OFF: Mode using CompositeBlack ON: Mode using Pure Black (notvalid with PostScript).
