SETTING UP > 61Memory menuDisk maintenance(Only appears if a hard disk is fitted.)System adjust menuItem Value DescriptionRECEIVE BUFF SIZE Auto; 0.5 Mb; 1 Mb; 2Mb; 4 Mb; 8 Mb; 16Mb; 32 MbSets the size of the receive buffer andwill depend on the amount of memoryinstalled in the printer.RESOURCE SAVE Auto; Off; 0.5 Mb; 1Mb; 2 Mb; 4 Mb; 8Mb; 16 Mb; 32 MbSet the size of the font cache area andwill depend on the amount of memoryinstalled in the printer.FLASH INITIALIZE Execute Initialises flash memory if fitted.PS FLASH RESIZE 1Mb; 0.5Mb; 1.5Mb;0MbChanges the size of the flash memoryarea. NOTE: Special data is stored inthe Flash Memory, therefore youcannot specify 100%.Item Value DescriptionHDD INITIALIZE Execute Partitions hard disk and formatseach partition.PARTITION #1 Common; PCL; PS Sets usage of partition number 1.PARTITION #2 Common; PCL; PS Sets usage of partition number 2.PARTITION #3 Common; PCL; PS Sets usage of partition number 3.HDD FORMATTING Partition 1; Partition2; Partition 3Formats specified partition.Item Value DescriptionX ADJUST 0.00 mm; +0.25 to +2.0mm; – 2.0 to –0.25 mmAdjusts overall print positionhorizontally in 0.20 increments.Y ADJUST 0.00 mm; +0.25 to +2.0mm; – 2.0 to –0.25 mmAdjusts overall print positionvertically in 0.20 increments.DUPLEX X ADJUST 0.00 mm; +0.25 to +2.0mm; – 2.0 to –0.25 mmAdjusts overall print position ofprint face horizontally in 0.20increments.DUPLEX Y ADJUST 0.00 mm; +0.25 to +2.0mm; – 2.0 to –0.25 mmAdjusts overall print position ofprint face vertically in 0.20increments.TRAY 1 A3 NOBI A3 Nobi; A3 Wide; A3Tabloid extraSets Tray 1 large paper size.
