- 205 -Macintosh utilities45123Convenient printfunctions Appendix IndexChecking andChanging PrinterSettings Usingthe Control PanelNetworkSetupMatchingColorsUsing UtilitySoftwarez Macintosh utilitiesPanel language setupOperations environmentMacintosh operating the Japanese languageversions of Mac OS X 10.3.9 to 10.9Setting the printerYou can change the display language of thecontrol panel.1 Output the device menu map.(1) Press the [Fn] key.The numerical values input screenwill be displayed.(2) Press [1], [0], [0], and press the[OK] button.2 Start the panel language setup utility.Referencez See “Installing utilities” (P.178).3 Select a connection method.If [TCP/IP] has been selected, enter theIP address. You can check the IP addressusing the menu map output in Step 1.4 Click [OK].5 Check that the value of the "LanguageFormat" in the menu map and the valueof the language version displayed in thewindow match the following conditions.Condition 1: the least numbers of theversion matchCondition 2: the value of the languageversion shown in the window is either thesame or newer (greater) than the value ofthe "Language Format"Memoz If condition 1 is not satisfied, the languagesettings cannot be downloaded. If the settings aredownloaded without condition 1 being satisfied,an error will be displayed on the control panel. Torecover, restart the device. Even if condition 1 issatisfied, if condition 2 is not satisfied, some of thesettings names may be displayed in English.6 Select the language.7 Click [Download].The file to set the language will be sentto the device, and a message stating thattransmission has finished will be displayed.8 Restarts the device.
