- 47 -Printing on various papers41235Apéndice ÍndiceComprobar y cambiarla configuración de laimpresora utilizando elpanel de controlConfig deredConcordarlos coloresUtilizaciónde softwarede utilidadesFunciones deimpresión útiles7 Click the [Paper] button in the [PrintOptions] panel, and select [Stacker(Face-up)] from [Output Bin].8 Click [Print] to print.Printing on user-selectedpaper sizes (custom pagesand lengthy printing)Register the desired paper size in the printerdriver, and specify when printing.[Sizes that can be fed from the Multi-Purpose Tray (Settable custom sizes)]Width: 64 to 330mmLength: 89 to 1321mm[Sizes that can be fed from the Multi-Purpose Tray]Trays 1/2/3/4/5Width: 99 to 330mmLength: 147 to 457mm[Sizes where 2-sided printing is possible]Width: 99 to 330mmLength: 147 to 483mmNotez If printing smaller paper than width 99mm and length147mm, feed from the Multi-Purpose Tray and output tothe face-up stacker.z Set the paper size to portrait length, and set in the device.z Not usable with some applications.z If feeding from the Multi-Purpose Tray, support the papermanually for paper lengths that are not fully supported bythe paper supporter.z If feeding from the paper trays (tray 1, (optional)trays 2 to 5), press the scroll buttons or onthe device control panel, and select [Menu]>[TrayConfiguration]>[Set Tray 1]>[Paper Size]>[Custom].z If there is no paper in the tray, setting the function toswitch automatically to a tray in which paper of the samesize has been set, the default settings will be enabled(i.e., the check box will be enabled). If the paper runs outduring printing, paper will feed from another tray. Disable(i.e., uncheck) the check box when printing custom sizepaper from a designated tray only.
