- 235 -51243Convenient printfunctions Appendix IndexChecking andChanging PrinterSettings Usingthe Control PanelNetworkSetupMatchingColorsUsing UtilitySoftwareSetting the network from the web browserChanging administratorpasswordsYou can change the password used when loggingin as a device administrator.1 Click [Admin Setup]>[Management].2 Click [Change Password].3 Enter the new password in [NewPassword], and then reenter the newpassword in [Verify Password].Notez When entering a password, "●●●●●" will bedisplayed on screen.z Enter an alphanumeric password from 6 to 12characters.z If entering alphanumerics in the password, correctlyenter capital and small letters.4 Click [Submit].5 The settings will be saved to the device.It is not necessary to restart the device.Use the new password when logging in asan administrator the next time.Notez This password is different from the TELNET password.When the password is changed here, the password whenlogging onto the administrator setup menu in the controlpanel will also be changed.
