- 227 -51243Convenient printfunctions Appendix IndexChecking andChanging PrinterSettings Usingthe Control PanelNetworkSetupMatchingColorsUsing UtilitySoftwareUsing DHCPSetting the printerTo use the device on a DHCP environment, setthe IP address setup method to automatic.Further, the default factory setting is to set theIP address automatically, so implementing thisprocedure is unnecessary.1 Press the scroll button or .2 Select [Admin Setup], and press the[OK] button.3 Enter the administrator password, andpress the [OK] button.4 Select [Network Setup], and press the[OK] button.������Admin Setup 1/3 PageNetwork SetupPrint SetupPS SetupPCL SetupXPS SetupUse Online button to return to standby screenUSB Setup5 Select [IP Address Set], and press the[OK] button.������Network Setup 1/3 PageTCP/IPEtherTalkIP Address SetIPv4 AddressSubnet MaskUse Online button to return to standby screenNetBIOS over TCP6 Select [Auto], and press the [OK]button.������TCP/IPNetBIOS over TCPEtherTalkIP Address SetIPv4 AddressSubnet MaskUse Online button to return to standby scrNetwork SetupUse Online button to return� ManualAuto� 1/1 PageIP Address Set7 Press the [ON LINE] button to return tothe standby screen.
