2 SETTING ITEMS (ADMIN)158 Setting Copy FunctionsSetting Copy FunctionsYou can change the system behavior for the copy operation, such as the maximum number of copies, auto 2-sided mode,and the sort mode priority.1 Press [COPY] in the ADMIN menu (1/2).The COPY screen is displayed.To display the ADMIN menu, see the following page: P.71 “Entering Admin Menu”2 Specify the following items as required and press .MAXIMUM COPIES — Press the number button that indicates the maximum number of copies to be allowed.The maximum number of copies to be allowed is 999 copies.AUTO 2-SIDE MODE — Press the button of the 2-Sided mode that initially applies to copy settings when originalsare placed in the Automatic Document Feeder. [OFF] — When this button is selected, the initial setting of the 2-Sided mode will be [1 -> 1 SIMPLEX] whenoriginals are placed in the Automatic Document Feeder. [1->2 DUPLEX] — When this button is selected, the initial setting of the 2-Sided mode will be [1 -> 2 DUPLEX]when originals are placed in the Automatic Document Feeder. [2->2 DUPLEX] — When this button is selected, the initial setting of the 2-Sided mode will be [2 -> 2 DUPLEX]when originals are placed in the Automatic Document Feeder. [USER] — When this button is selected, the screen to select the 2-Sided mode will be displayed when originalsare placed in the Automatic Document Feeder.SORT MODE PRIORITY — Select the default sort mode that is applied for copy jobs. If [STAPLE] is selected, theoutput is stapled on the upper left corner as the default. To staple copies, the optional finisher must be installed.
