2 SETTING ITEMS (ADMIN)192 IEEE 802.1X Authentication SettingIEEE 802.1X Authentication SettingThis menu allows you to make settings for IEEE 802.1X authentication that will apply to wired networks.This equipment supports the following authentication methods: EAP-MD5 EAP-MSCHAPv2 EAP-TLS PEAPThe following protocol is available for inner authentication:- EAP-MSCHAPv2 EAP-TTLSThe following protocols are available for inner authentication:- PAP- CHAP- EAP-MSCHAPv2- EAP-MD5The following certificates are required for each authentication method using TopAccess to enable IEEE 802.1Xauthentication:For instructions on how to install certificates, refer to the TopAccess Guide “Chapter 8: [Administration] TabPage”.The settings for IEEE 802.1X authentication depend on the authentication method you select. Setting IEEE802.1X authentication1 Press [802.1X SETTINGS] on the ADMIN menu (1/2).The WIRED 802.1X SETTINGS screen is displayed.To display the ADMIN menu, see the following page: P.71 “Entering Admin Menu”Authentication Method Inner Authentication Method CA Certificate User CertificateEAP-MD5 — — —EAP-MSCHAPv2 — — —EAP-TLS — Required RequiredPEAP EAP-MSCHAPv2 Required —EAP-TTLS PAP Required —CHAP Required —EAP-MD5 Required —EAP-MSCHAPv2 Required —
