2 SENDING/RECEIVING A FAX16 Sending a FaxRedial functionIn the memory transmission mode, if the fax cannot be sent due to a busy-line, the fax number is redialed automatically tosend the fax. By default, this equipment redials 3 times at 1-minute intervals.Batch transmission functionIf there are multiple transmission jobs to the same recipient in memory, you can send them at once using this function,resulting in reduction of communication costs. However, if their recipients are the same but their transmission conditionsvary or if users or departments are different when this equipment is managed under the department management or usermanagement, this function is not applied to those reserved jobs.Sending the next originalIf an original is placed on the original glass and its scanning is completed, the confirmation screen for the next original isdisplayed. If you want to continue scanning of the next original, place it on the original glass, and then press the [START]button on the control panel. Once all the originals are scanned, press [JOB FINISH]. If you place an original on the RADF(Reversing Automatic Document Feeder) and press the [CONTINUE] button during scanning, the confirmation screen forthe next original can be displayed after the scanning is completed. If you leave the screen unattended for a period of the auto clearance setting time (45 sec. by manufacturer default), acopy of the scanned originals is sent. To cancel the transmission in the memory transmission mode, press [JOB CANCEL]. P.45 “Canceling the memory transmission” To change the transmission conditions for each page, press [OPTION]. P.24 “Changing the settings for each page”
