Oki CX4545 MFP Quick Start Manual

Also see for CX3535MFP: Safety information Material safety data sheet Manual Safety information Operator's manual

Contents

Oki CX4545 MFP Quick Start Manual Manual pdf 15 page image

1Turning Power ON/OFFThis section explains how to turn the power ON and OFF as well as the energy saving mode. How to turn the power ON differsbetween when the MAIN POWER lamp (red) on the control panel is lit and when it is not.Turning Power ON/OFF13When the equipment is controlled under the department or user management function, enter the department code or userinformation first. For details, see the following page:P.66 “Logging in” in this manualTurning the power ONWhen the MAIN POWER lamp (red) on the control panel does not light:Open the main power switch cover and turn the power ONthere.When the MAIN POWER lamp (red) on the control panel lights:The equipment will be ready for copying after about 89 seconds for 230 V ES9460 MFP, about 99 seconds for 115 VCX3535 MFP, and about 160 seconds for ES9470 MFP/CX4545 MFP, and “READY” appears.When you turn the power of the equipment OFF, be sure also to shut it down by pressing the [POWER] button on thecontrol panel. Do not simply turn the main power switch OFF. For details, see the following page:P.14 “Turning the power OFF (Shutdown)” in this manualWhen “ERASING DATA” appearsThis message appears when the Data Overwrite Enabler (optional) has been installed. It appears immediately after thepower is turned ON or after the equipment has been operated. You can operate the equipment even if it is displayed.Press the [POWER] button.The equipment starts warming-up. “Wait Warming Up” appearsduring warming-up.While the equipment is warming up, you can use the auto jobstart function. For details, refer to the following guide:Copying Guide (PDF): “Chapter 2: HOW TO MAKE COPIES” -“Making Copies”••