Oki CX4545 MFP Quick Start Manual

Also see for CX3535MFP: Safety information Material safety data sheet Manual Safety information Operator's manual

Contents

Oki CX4545 MFP Quick Start Manual Manual pdf 8 page image

Chapter 1 PREPARATIONSDescription of Each ComponentThis section describes the names and operations of the equipment, control panel and touch panel.61. Reversing Automatic Document Feeder(optional, MR-3022)The stack of originals is scanned one sheet at a time. Bothsides of the originals can be scanned. A maximum of 100sheets (80 g/m2 or 20 lb. Bond) can be placed in one go.(The maximum number of sheets that can be set may varydepending on the media type of the originals.)2. Operator’s Manual Pocket (back side, optional,KK-1660)Keep the manual in this pocket.3. Main power switchUse this switch to turn the power of the equipment ON orOFF.P.13 “Turning Power ON/OFF4. USB portUse this connector when printing files stored in a USBdevice or storing scanned data into the USB device.5. USB terminal (4-pin)Use this terminal when connecting this equipment to a PCwith a commercially available USB cable.6. Network interface connectorUse this connector when connecting this equipment to anetwork.7. Automatic duplexing unitThis unit makes copies on both sides of the paper. Open itwhen paper jams occur.8. Bypass trayUse this to perform printing on special media types suchas OHP film, waterproof paper, etc.P.25 “Bypass copying” in this manual9. Paper feed coverOpen this cover when releasing paper misfed in thedrawer feeding area.10. Paper Feed Cover (optional)Open this cover when releasing paper misfed in the PaperFeed Pedestal (optional) or Large Capacity Feeder(optional).11. Paper size indicatorThe size of the paper set in the drawer can be checked.12. Paper Feed Pedestal (optional, KD-1027) andAdditional Drawer Module (optional, MY-1035)or Large Capacity Feeder (optional, KD-1028)Use the Paper Feed Pedestal (optional) to add one drawer.The Additional Drawer Module (optional) can be installedin this device.A maximum of 2500 sheets (80 g/m2 or 20 lb. Bond) ofplain paper can be placed in the Large Capacity Feeder(optional).13. DrawerA maximum of 550 sheets (80 g/m2 or 20 lb. Bond) or 500sheets (105 g/m2 or 28 lb. Bond) of plain paper can beplaced in one go.P.16 “Placing paper” in this manual14. Front coverOpen this cover when you replace the toner cartridge andclean the charger.Front / Right side14131211178910Back side23456Back side