ES 1220n Menu Functions • 196PCL Emulation MenuNote: Factory default settings are shown in bold.Item Settings ExplanationFONTSOURCERESIDENT / DIMM0 /DIMM1 / DOWNLOADEDSpecifies the location of thePCL default font. Changethe setting appropriately ifadditional fonts are installedin the expansion ROM slotor additional fonts havebeen downloaded to theprinter as permanent fonts.FONT NO. I000 / C001 / S001 Sets the current default fontnumber from the currentlyselected source:I = internal (resident font);I000 = Courier.C = Font stored in theprinter's Flash memory.S = downloaded soft font,stored on the printer'sinternal hard disk drive.Applies only to printers withthe optional hard disk driveinstalled.FONT PITCH 0.44 to 99.99 CPIDefault = 10.00 CPISets the character width ofthe default font in charactersper inch (CPI). This is onlyavailable when the selectedfont is fixed width andscalable.
