6-9U sing F-code FeatUres1234567891011121314A Using F-code box FeatUresPrinting a document stored in a bulletin box1 Switch to the fax mode by pressing <copy4Fax4scan>.2 Press Select F-Code Box01:Bulletin box 13 Press <q> or <p> to select the bulletin box. Then press .01:F-Code DocumentEnter I.D. Code:****(If the I.D. code is not set for this box, you can skip to step 5.)4 Use the numeric keys to enter your F-code box’s four-digit I.D. code.5 Press .01:Select File No.00:All Documents6 Press <q> or <p> to select the file number (1-30) of the document you want to print.If you want to print all documents stored in the bulletin box, enter “00”.7 Press .Your machine prints the chosen document, then returns to the standby mode.Erasing a document stored in a bulletin box1 Switch to the fax mode by pressing <copy4Fax4scan>.2 Press Select F-Code Box01:Bulletin box 13 Press <q> or <p> to select the bulletin box. Then press .01:F-Code DocumentEnter I.D. Code:****(If the I.D. Code is not set for this box, you can skip to step 5.)4 Use the numeric keys to enter your F-code box’s four-digit I.D. code.5 Press .01:Select File No.00:All Documents6 Press <q> or <p> to select the file number (1-30) of the document you want to erase.If you want to erase all documents stored in the bulletin box, enter “00”.7 Press . The following two displays will appear alternately:01:Bulletin box 1Erase Enter01:Bulletin box 1Not Erase Cancel8 Press to erase the document and to return to the standby mode.Press to quit without erasing and to return to the standby mode.
