6-12UsingF-codeFeatUresPolling a document using a subaddress and password1Switch to the fax mode by pressing <copy4Fax4scan>.2Press until “F-Code Polling” appears on the LCD then press.F-Code Polling//Enter– or –Press the soft keyEnter Sub-Address_3Use the numeric keys to enter the appropriate ITU-T subaddress.Then press .Enter Password_The password setting is optional, but required if the other party has set a password ontheir F-code box.4Use the numeric keys to enter the ITU-T password.Then press .If you do not need to enter the ITU-T password, press without entering anynumber.Enter Fax Number_5Enter the fax number.You may use a one-touch key, speed-dial number or the numeric keys to enter the faxnumber.6Press .Your machine dials the number and polling the document from the remote F-codecompatible machine.To cancel the polling in progress, press and , .To cancel the delayed polling, press , search the command number youwant to cancel using the cursor key, then press , . (See also “Review-ing or canceling command,” on page 4-7.)
