Oki MB 260 User Manual
Also see for MB 260: Quick start guide
                                                       | |
Contents
| 
MB260- 20 -3 - CopyAnalysis origin setupIf you want, you can change the origin of the scanner.By entering new values for X and Y in mm (X < 209 andY < 280), you move the analysed area as shown on thediagram below. 843 - ADVANCED FCT/COPY/ORIGIN1 Press , enter 843 using the keypad.2 Select the X and Y coordinates with the buttons or .3 Setup the desired coordinates with the numericalkeypad or the buttons and .4 Confirm your choice by pressing the OK button.5 Quit this menu by pressing the button.Contrast setupThe CONTRAST parameter allows to choose thephotocopy contrast. 844 - ADVANCED FCT/COPY/CONTRAST1 Press , enter 844 using the keypad.2 Setup the desired level of contrast with the buttons and .3 Confirm your choice by pressing the OK button.4 Quit this menu by pressing the button.Brightness setupThe BRIGHTNESS parameter allows to lighten or darkenyour output. 845 - ADVANCED FCT/COPY/BRIGHTNESS1 Press , enter 845 using the keypad.2 Setup the desired brightness with the buttons and .3 Confirm your choice by pressing the OK button.4 Quit this menu by pressing the button.Paper type setup 851 - ADVANCED FCT/SCAN. & PRINT/PAPERTYPE1 Press , enter 851 using the keypad.2 Select the paper NORMAL or THICK that you usewith the buttons and .3 Confirm your choice by pressing the OK button.4 Quit this menu by pressing the button.Paper tray selectionThe Automatic selection can have two meaningsdepending on the paper format defined on the papertrays. The following table describes the different cases. 852 - ADVANCED FCT/SCAN. & PRINT/TRAYPAPER1 Press , enter 852 using the keypad.2 Select the default paper tray to use, AUTOMATICor MANUAL, with the buttons and .3 Confirm by pressing the OK button.4 Quit this menu by pressing the button.Flat-bed analysis margins setupIf you want to, you can offset the lateral margins of thedocument to the left or right during the analysis with yourflat-bed scanner. 854 - ADVANCED FCT/SCAN. & PRINT/FLATBED MARG1 Press , enter 854 using the keypad.2 Setup the left / right margins offsets (by 0.5 mmsteps) with the buttons and .3 Confirm by pressing the OK button.4 Quit this menu by pressing the button.Left and right printing margins setupIf you want to, you can offset the lateral margins of thedocument to the left or right during printing. 855 - ADVANCED FCT/SCAN. & PRINT/PRINTER MARG1 Press , enter 855 using the keypad.2 Setup the left / right margins offsets (by 0.5 mmsteps) with the buttons and .3 Confirm by pressing the OK button.4 Quit this menu by pressing the button.Default tray Tray used for copySame paperformat in thetraysAUTOMATICSelection between themain tray and themanual tray.MANUAL The manual tray isused.Differentpaper formatin the traysAUTOMATIC The main tray is used.MANUAL The manual tray isused. |
Related manuals for Oki MB 260
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine