Oki MB 260 User Manual

Also see for MB 260: Quick start guide

Contents

Oki MB 260 User Manual Manual pdf 31 page image

MB260- 27 -6 - Network features8 IP CONF.: MANU or IP CONF.: AUTO appear onthe screen.If you choose to set up the system manually, go tothe next paragraph and enter the parametersIP ADDRESS, SUBNET MASK and GATEWAY.9 At the end of this procedure, you return to the mainmenu of SETUP WIZARD.10 Exit this menu by pressing the key .Once the network has been set up, the LED of the WLANUSB key should be on.Referring to or changing yournetwork parametersEach of the parameters of your network may be changedas your network develops. 2822 - SETUP / WLAN / PARAMETERS / IPADDRESS1 Type in , select the menu SETUP using the keys or and confirm with OK.2 Select WLAN using the keys or and confirmwith OK.3 Select PARAMETERS using the keys or andconfirm with OK.4 Select IP ADDRESS using the keys or andconfirm with OK.5 The number of your IP address will appear in theformat 000.000.000.000. Enter the new IP addressfor your machine in the format displayed andconfirm with OK.6 Exit this menu by pressing the key . 2823 - SETUP / WLAN / PARAMETERS / SUBNETMASK1 Type in , select the menu SETUP using the keys or and confirm with OK.2 Select WLAN using the keys or and confirmwith OK.3 Select PARAMETERS using the keys or andconfirm with OK.4 Select SUBNET MASK using the keys or andconfirm with OK.5 The number of your subnet mask will appear in theformat 000.000.000.000. Enter the new submaskof your machine in the format displayed andconfirm with OK.6 Exit this menu by pressing the key . 2824 - SETUP / WLAN / PARAMETERS / GATEWAY1 Type in , select the menu SETUP using the keys or and confirm with OK.2 Select WLAN using the keys or and confirmwith OK.3 Select PARAMETERS using the keys or andconfirm with OK.4 Select GATEWAY using the keys or andconfirm with OK.5 The number of your gateway will appear in theformat 000.000.000.000. Enter the new gatewayfor your machine in the format displayed andconfirm with OK.6 Exit this menu by pressing the key . 2825 - SETUP /WLAN / PARAMETERS / SSID1 Type in , select the menu SETUP using the keys or and confirm with OK.2 Select WLAN using the keys or and confirmwith OK.3 Select PARAMETERS using the keys or andconfirm with OK.4 Select SSID using the keys or and confirmwith OK.5 The name of your network will appear on thescreen. Enter the new name of your network andconfirm with OK.6 Exit this menu by pressing the key . 2826 - SETUP / WLAN / PARAMETERS / MODE1 Type in , select the menu SETUP using the keys or and confirm with OK.2 Select WLAN using the keys or and confirmwith OK.3 Select PARAMETERS using the keys or andconfirm with OK.4 Select MODE using the keys or and confirmwith OK.5 The symbol >>, tells you that your network is inactive mode.6 Select one of the modes and confirm with OK.- If you choose the AD-HOC MODE, the sub-menu CHANNEL will appear; enter a numberbetween 1 and 13 (1 to 11 for the US) andconfirm with OK.7 Exit this menu by pressing the key .ImportantIn an AD-HOC network, the devicescommunicate directly with eachother without passing through anaccess point. The speed ofcommunication across the wholeAD-HOC radio network is as fast asthe weakest connection in thenetwork. The speed ofcommunication is also dependent onspatial distance between transmitterand receiver, as well as the numberof barriers, such as walls or ceilings.