64 • Configuring your machineSetting the fax facility(MB470 MFP & MB480 MFP)Initial set upThe following parameters must be set before using the fax function on your MFP:• Date and time• Country code• Local Phone No.• Sender IDThere are other parameters that can be adjusted to suit your personal preferenceslater if required, refer to fax set up table for details (See “Advanced set up” onpage 65.).To set fax parameters:1. Using the Down arrow key, scroll to Menu and press Enter.2. Using the Down arrow key, scroll to Admin Setup and press Enter.3. Using the arrow keys and on-screen keypad, enter the Administrator password.Highlight Done and press Enter.4. Using the Down arrow key, scroll to Fax Setup and press Enter.5. Press Enter to select the Clock Adjustment menu.6. Using the arrow keys and keypad, enter the time and date.7. Press Enter to confirm.8. Using the Down arrow key, scroll to Basic Setup and press Enter.9. Using the Down arrow key, scroll to Country Code and press Enter.10.Using the arrow keys, scroll to the country in which the MFP is situated and pressEnter to confirm.11.Using the Down arrow key, scroll to Local Phone No. and press Enter12.Using the keypad or arrow keys, type in the local phone number press Enter toconfirm.13.Using the Down arrow key, scroll to Sender ID and press Enter.14.Using the keypad or arrow keys and the on-screen keypad, type in the sender ID.15.Highlight Done and press Enter.NoteUse the Right and Left arrow keys to move between digits.
