Oki MB760dnfax User's Manual And Troubleshooting Manual

Also see for ES7170dfn MFP: User manual User manual User manual User manual

Contents

Oki MB760dnfax User's Manual And Troubleshooting Manual Manual pdf 39 page image

2134567TROUBLESHOOTING FOR NETWORK CONNECTIONS- 39 -IPP print in a Windows operating system environmentNovell print in a NetWare environment5 Is the Raw TCP or LPR port configured with the correctIP address?Next Step  Refer to the Basic Guide to configure the proper port.6 Can you print to the equipment?End See the following section to fix the problem: P.24 "Cannot print with the equipment (networkconnection problems)"No. Check... Yes No Corrective Action1 Are the IP address properties correctly set? Next Step  Set up the IP address correctly.2 Is the HTTP server on the equipment enabled? Next Step  Enable the HTTP server in the HTTP Network Service.3 Is the IPP print correctly set? Next Step  Set up the IPP print service correctly.4 Were the proper printer drivers installed? Next Step  Refer to the Basic Guide to install the proper printerdrivers.5 Is the IPP port configured with the correct URL? Next Step  Refer to the Basic Guide to configure the proper port.6 Can you print to the equipment?End See the following section to fix the problem: P.24 "Cannot print with the equipment (networkconnection problems)"No. Check... Yes No Corrective Action1 Are the IPX/SPX protocols enabled? Is the correct frametype selected?Next Step  Set up the IPX/SPX correctly.2 If applicable, did you successfully set up queue-basedprint?Next Step  Set up the NetWare server properly.3 Did you configure the equipment for a NetWareconnection?Next Step  Set up the NetWare network settings correctly.4 Did you configure the equipment for NetWare printservice?Next Step  Set up the NetWare print service correctly.5 Were the proper printer drivers installed? Next Step  Refer to the Basic Guide to install the proper printerdrivers.6 Is the IPP port configured with the correct URL? Next Step  Refer to the Basic Guide to configure the proper port.7 Can you see the equipment in Windows NetworkNeighborhood?Next Step  Check that the SMB protocol is enabled in the clientcomputers.8 Can you print to the equipment?End See the following section to fix the problem. P.24 "Cannot print with the equipment (networkconnection problems)"No Check... Yes No Corrective Action