Loading paper > 27MULTI PURPOSE TRAY1. Open the multi purpose tray and press gently down on thepaper platform (1) to ensure it is latched down.2. Load the paper and adjust the paper guides (2) to the sizeof paper being used.> When printing on headed paper load the paper into themulti purpose tray with pre-printed side up and topedge into the MFP.> Envelopes should be loaded face up with top edge tothe left and short edge into the MFP.> Do not exceed the paper capacity of about 50 sheets or10 envelopes. Maximum stacking depth is 0.3937inches (10mm).3. Press the tray latch button (3) inwards to release thepaper platform, so that the paper is lifted and gripped inplace.4. Set the correct paper size for the multi purpose tray ineither the Media Menu (printer menu settings) or PrintMenu (scanner menu settings). See “Configuration” onpage 34 for details.123NoteBefore closing the multi purpose tray, paper platform(1) must be latched down.