- 32 -Unpacking and Installing the Machine1245634 Load paper in the paper tray.(1) Open the paper tray.(2) Adjust the paper stop and paperguide to match the paper size.Paper GuidePlatePaper StopPaperGuideNote• Squeeze the paper stop to adjust its position.• Do not remove the cork that is attached to theplate.(3) Flex the stack of paper back andforth a few times. Then, make aneat stack by straightening itsedges against a level surface.Note• Using paper that is not recommended maycause the machine to malfunction.& For details about paper, see "Supported Paper"(P.55).(4) Load the paper with the side tobe printed on face down.Set the directionof the paper.The side to be printedon should be face down.MarkNote• Load the paper, making sure that it does notexceed the mark on the paper guide. (530pieces at 82g/m2)(5) Set the paper size dial to matchthe size of the paper.Rotate the paper size dial untilit shows the size of papercontained in the paper tray.Paper Size Dial(6) Close the paper tray.
