- 8 -124563■ Other points•Be very careful to treat the touch panel gently and never hit it. Breaking the surface could causemalfunctions.• Be sure to turn the power OFF when leaving the office or if there is a power outage. However, do notturn the power OFF if the weekly timer is in use.•Be careful because the paper exit area and paper just after exiting are hot.•Do not place anything other than paper on the receiving tray. This could disturb a normal operationand cause malfunctions.•Do not touch the photoconductive drum and transfer belt. This could cause image problems.•Do not open/close the covers and the MPT, or pull out the trays during printing.During maintenance or inspectionWARNING• Never attempt to repair, disassemble or modify the machine by yourself. You could cause a fire or getan electric shock.• Do not let liquids such as water and oil get into the machine when cleaning the floor. This could causea fire and give you an electric shock.CAUTION•Always keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This couldcause a fire and give you an electric shock due to the heat released by electric leakage.•Do not touch the stapling area. The actual needle point could cause you personal injury.■ Other points•Do not use such solvents as thinner or alcohol when cleaning the surface of the machine.- This could warp the shape of the surface or leave it discolored.- When using a chemical cleaning pad to clean it, pay attention to any cautionary points.