Oki MC760x User Manual

Contents

Oki MC760x User Manual Manual pdf 67 page image

- 67 -How to Load the Paper124563Configuring the paper trayMatch the paper tray to the loaded paper. Refer to the following table and configure paper type andthickness by using the operator panel.Complete the settings by pressing the [SETTING] button, and then [TRAY] - [PAPER TYPE].Paper Type Paper ThicknessSetting value for the operatorpanelSetting of the[Paper Thickness]of the PrinterDriver:* 2Paper Thickness Paper Type*1Plain Paper 64-82g/m2 Plain Paper Plain Paper Plain Paper83-105g/m2 Heavy Paper Heavy Paper106-128g/m2 Ultra Heavy 1 Paper Ultra Heavy 1 Paper129-200g/m2 Ultra Heavy 2 Paper Ultra Heavy 2 PaperEnvelope - - - -Label 0.1 to 0.17 or less. Ultra Heavy 1 Paper Label Label 10.17-0.2mm Ultra Heavy 2 Paper Label 2*1: This is configured to [Plain Paper] at the time of shipment from the factory.*2: You can configure the paper thickness and paper type by using the operator panel or the printerdriver. If you use the printer driver, the printer driver settings take precedence. If [AutomaticSelection] is selected as the [Paper Source] of the printer driver or [Printer Settings] is selected asthe [Paper Thickness], the operator settings take precedence.*3: The printable thickness for duplex printing is 64 to 105 g/m2.*4: No setting is required for envelopes.Memo• If paper thickness is set to Ultra Heavy 1 or Ultra Heavy 2 and paper type is set to [Label], the printing speed becomesslower.