45850101TH Rev.1 3-41Oki Data CONFIDENTIAL 3. MAINTENANCE MENUS3.6 Manual density adjustment settingMC853/MC873/ES8453/ES8473 is shipped with the auto density adjustment mode enabled.When the mode is disabled by a user, the printer may print density out of adjustment whilebeing used. Manually perform density adjustment setting when the printer prints an improperdensity.Note! The setting must be performed with the printer in a static state. Do not performit while the printer warms up.(1) Enter the Admin Setup menu.(2) Select and execute [Print Setup]-[Color Menu]-[Adjust Density] in the menu.Auto density adjustment starts, the operator panel display providing a messagestating that density is being adjusted.
