Technical Reference Guide – Appendix D – Media specifications > 229NOTEPrinting data in the light-grey filled areas is possible, but mayaffect paper feed accuracy.Print specifications do not apply to the last sheet of paper.In setting print formats, take note that printing data beyondprinting areas may impair print quality or adversely affect theprinter.Each horizontal perforation is to be accurately at the centre ofthe space between paper feed holes. Placing horizontalperforations close to paper feed holes causes the paper topeel, and carriage snagging on the paper may occur.Do not attempt to save paper by allowing the sprocket holes inthe last page to come off the pin tractor sprockets.PAPER QUALITYThe following paper quality is usable:E Upper edge of printing area 19.05 mm (3/4 in)F Upper edge of printable area 6.35 mm (1/4 in)G Paper end detecting position Approx. 72 mm(2.84 in)H Left printing prohibition area 12.7 to 22.2 mm (1/2to 7/8 in) for paperwidths between 3 and11 in.14.0 to 22.2 mm (0.55to 7/8 in) for paperwidth 12 in.I Right printing prohibition area 11.43 mm (9/20 in)[I': 12.7 mm (1/2 in)].DIMENSION NAME SPECIFICATIONVALUETYPE PAPER QUALITYSingle-part Form White, high quality paperMultipart Form Pressure-sensitive paper, carbon-backed paper orinterleaved paper ( Note 1)
