Technical Reference Guide – Operator interface > 50BUTTON SWITCH FUNCTIONSOPERATION1. To enter Menu Mode:If the printer power is OFF, while holding down the SELbutton turn the power ON.2. On entering the Menu mode, “Menu Print?” is printed.3. See “Button switch functions” on page 50 for a descriptionof how to navigate the menus.4. To exit the Menu mode, hold down the TEAR and LOAD/EJECT buttons and press the LF/FF button.SWITCH FUNCTIONTEAR Pressing TEAR on its own prints the current menusettings.SEL Moves forward through a group of menus. Whenthe last group is selected, the first group will comeup on pressing SEL.TEAR + SEL Moves backward through a group of menu items.When the first group is selected, the last group willcome up on pressing SEL.LF/FF Moves forward through the menu items.When the last item is selected, the first item willcome up on pressing LF/FF.TEAR + LF/FF Moves backward through the menu items.When the first item is selected, the last item willcome up on pressing TEAR + LF/FF.LOAD/EJECT Moves forward through the values of a menu item.When the last value is selected, the first value willcome up on pressing LOAD/EJECT.TEAR + LOAD/EJECT Moves backward through the values of a menuitem.When the first value is selected, the last value willcome up on pressing TEAR + LOAD/EJECT.TEAR + LOAD/EJECT +LF/FFExits the Menu mode and saves settings.The printer enters the initial state as at power on.Power OFF Exits the Menu mode without saving settings.
