Technical Reference Guide – Appendix D – Media specifications > 250Use label paper that is free of paper scraps i.e. paper otherthan labels that has peeled off the glue and may have attacheditself to labels or elsewhere.Use only high quality label and substrate paper.As far as possible, use a soft label paper.Do not remove the label scraps.Ensure that the label paper is not skewed as it is fed into theprinter.Cut details:Cuts must be in the labels only (to the bottom of thefacestock).The cut-lines of the substrate and facestock must coincide. Donot cut both edges in the 1 – 2 mm margin area.Provide an uncut margin (approximately 0.5 – 1 mm) aroundthe left/right edges at the top of the label.PACKAGE DELIVERY SLIPSThe paper sizes and printing areas of package delivery slipsconform to those of continuous paper (specified in “Continuouspaper (continuous forms)” on page 223) or cut-sheet paper(specified in “Cut-sheet paper” on page 238), whichever formatis applicable.Label that has not collected scrapsLabel that has collected scraps. (DO NOT use).LabelLabel LabelLabel LabelLabel LabelSubstrate (Ground) paperLabelLabel LabelLabel LabelLabel LabelSubstrate (Ground) paper
