ML1120/ML1190 eco User’s Guide – Specifications > 102ML1190ECOITEM SPECIFICATIONProduct Name ML1190 ecoModel No. D22410BPrint method Impact dot matrixPrint head 24 pins, 0.2 mm (0.0079 in) diameterPrint direction Bi-directional, short-line-seeking printingPrint speedHigh Speed Draft (HSD)Letter Quality (LQ)Utility333cps @ 10 cpi83 cps @ 10 cpi250 cps @ 10 cpiLine Feed (LF) time Approximately 47 ms per line for LF of4.23 mm (1/6 in)Form Feed (FF) speed Approximately 109 mm/s (4.3 in/s)Paper feed control Paper feed: yesVertical tab: yesDirect line feed: yesDuplication capability Continuous forms: the original page +4 morepages (total maximum paper thickness lessthan 0.325 mm)Cut sheet: the original page +4 more pages(total maximum paper thickness less than0.325 mm)Feeding direction Feed forwardFeed backwardFeed upwardFeeding mode Friction feed mode (top)Pin tractor feed mode (rear)Pin tractor feed mode (bottom)Continuous forms tape taildetection methodDetected when remaining paper isapproximately 46 mm long. It can, however,print till about 6 mm from the paper bottom(measured at the centre of the characters).(The print accuracy of the last page cannotbe guaranteed.)Character sets Standard ASCIIEpson (Italics/Graphics)IBM (Set1/Set2)ForeignCode Page