Oki ML1120 User Manual

Also see for ML1120: Reference guide User guide Safety & warranty Manual Installation guide

ML1120/ML1190 eco User’s Guide – Paper handling > 373. Check the position of the tear-off perforations (1) relativeto the paper cutter (2).(a) To advance the forms, continue to hold down theTEAR button and then the SEL button.(b) To retract the forms, continue to hold down theTEAR button and the LF/FF button.4. Release the buttons after the tear-off perforations havebeen aligned with the paper cutter.REMOVING CONTINUOUS FORMS1. Tear off the continuous forms. See “Tearing off continuousforms” on page 36.2. Press the SEL button to set the printer off-line andreposition the continuous forms in the printer.3. Press the LOAD/EJECT button to move the front edge ofthe continuous forms backwards to the Pin Tractors.12NOTEIf the specified correction range is more than +_ 3.53 mm(20/144 in) for ML1120 eco and +_ 4.23 mm (30/180 in) forML1190 eco, the paper cannot be removed.NOTEIf sprocket holes of the last page of the forms disengage fromthe sprocket pins, do not attempt to eject the paper to avoidthe possibility of a paper jam.