ML1120/ML1190 eco User’s Guide – Troubleshooting > 86at the back of the printer and pushing gently forward untilthe Input Tray clips into place.8. Set the Power Switch to ON.RESPONDING TO ALARM CONDITIONSUse the following table for guidance on how to respond toindicated alarm conditions.INDICATOR ALARM MEANINGS AND ACTIONSSEL ALARMOFF ON Paper has run out. Add paper and press the SELbutton.OFF Flashing The Paper Type lever is wrongly set for the type ofpaper in use. Press the SEL button and set thePaper Type lever to the correct position.OFF Flashing Problem with cut sheet feeding. Remove the cutsheet.Flashing ON Print data is received but printing does not startbecause no paper is being fed. Insert paper.Flashing OFF Printing cannot be resumed at this stage. Turn thepower OFF, verify that the carriage moves properly,then turn the power ON again.If the problem is still there after you turn thepower ON again, contact your dealer.