ML1120/ML1190 eco User’s Guide – Connecting to a computer > 15CONNECTING TO A COMPUTERIn this section you will interconnect your printer and computer,install the printer driver in your computer and print a test page.INTERFACESYour printer is equipped with three data interfaces:> Parallel: for direct connection to a PC. This port requires abi-directional (IEEE 1284 compliant) parallel cable.> Serial: for direct connection to a PC. This port requires abi-directional RS232C serial interface cable.> USB: for connection to a PC running Windows 98 orabove. This port requires a shielded cable less than 5mlong conforming to USB version 2.0.INTERCONNECTION1. Ensure that both printer and computer are turned OFF.2. Connect the required interface cable, serial (1), USB (2),or parallel (3), to the printer and then to the computer.CAUTION!Do not use more than one of the following datainterface methods to connect to your PC.NOTEInterface cables are not supplied with your printer.