Oki ML5521 User Manual

Also see for ML5520: User guide

Contents

MENU MODE > 38overridden by the software’s settings when the I-Prime signalis sent.Language Set, Default = ASCIIReplaces certain standard symbols with special characters used inforeign languages.Line Spacing, Default = 6 lpiChange to 8 lines per inch (lpi) to get more lines on a page.Operator Panel Function, Default = Full OperationChange to Limited Operation to deactivate the PRINT QUALITY andCHARACTER PITCH buttons, so that these features can only becontrolled through your software. This prevents these from beingchanged from the control panel when several people are using theprinter.Page Length, Default = 11-2/3" or 1/2"Selects the length of the paper you are using. This enables the printerto keep track of the initial printing position (TOF) on each page.Page Length Control, Default = by Actual Page LengthIf you wish to use the Paper End sensor to detect the actual paper end,use Actual Page Length setting. If you use “by Menu Setting”, theprinter will disregard the Paper End (PE) and use the page length asset by the menu.Page Width, Default = 13.6"Wide carriage model only.NOTEThis feature also prevents access to the Menu. To access the Menu inthese circumstances, turn the printer off, then hold down the SEL keywhile turning ON the printer.