Oki ML8810n User Manual

Also see for ML8810n: Setup guide User guide Installation instructions Brochure Safety & warranty

Oki ML8810n User Manual Manual pdf 54 page image

OkiLAN 7120e Network Userís Guide54UNIXOverviewThe OkiLAN 7120e supports many protocols such as LPD, FTP, TELNET,SNMP and IPP, and works within the UNIX environment.To use the network card within the UNIX environment, the following stepsare required:ConfigurationNetwork Interface card settingThe first step in installing the network card under UNIX is to set up the IPaddress, Subnet Mask and Gateway. This section explains one way to setthem up from a UNIX workstation.> The network addresses used in this manual are shown asexamples only. Network addresses used in your installationmust be generated for your own network.> Login as [root] to change the configuration of the OkiLAN7120e.> If an incorrect IP address, Subnet Mask or Gateway isentered, the network may go down or other damage mayoccur. Check the address with your network manager.The following explanation uses Sun Solaris 2.8 (Solaris 8) as an example.The actual commands may differ between versions of UNIX, so refer to theworkstation manuals for more information.1. Log in as [root] to the workstation> If you do not have superuser rights, the network manager shouldconduct the configuration.2. If the OkiLAN 7120e does not have an IP address alreadyassigned, use the arp command to set a temporary IPaddress.Example: for IP address 192.68.20.127 and network card address00:80:87:01:00:D2# arp –s 192.168.20.127 00:80:87:01:00:D2 tempThe Ethernet (MAC) address 00:80:87:01:00:D2 in the above examplecan be determined from the network card self-diagnostic test.