Oki ML8810n User Manual

Also see for ML8810n: Setup guide User guide Installation instructions Brochure Safety & warranty

Oki ML8810n User Manual Manual pdf 9 page image

OkiLAN 7120e Network Userís Guide9This utility must be used on a PC that is located in the same segment asthe printer. To create a NetWare queue, NetWare Client 32 orIntranetWare Client should be installed in your system.The following explanation uses Windows 98 as an example.1. Insert the CD-ROM into the CD-ROM drive. The Setup Utilitystarts automatically. If it does not start, double-clickautorun.exe on the CD-ROM.2. Select [Optional Utilities].3. Select [Install Network Setup Utility].4. Select the appropriate language.5. Select [OKI Device Quick Setup].6. Follow the on-screen instructions.> The NetWare Client 32 or IntranetWare Client should be installed onthe PC used for the creation of network queues. Installation enablesthe user to create network queues and perform other functions.7. If the settings are correct, click [Execute]. The new settingsare transmitted to the network card but the network card isstill operating with pre-transmission settings.8. Click [Finish] to validate the new settings. Depending on themodel, the printer may have to be switched off and on again.Using AdminManagerAdminManager is a powerful Microsoft Windows-based utility to configureall of OkiLAN 7120eís functions easily and intuitively by using a graphicaluser interface. (AdminManager can also be used with OkiLAN 7100e,7100e+, 7200e, 7300e and 8100e network cards.)Configuration requires a PC with Windows 95/98/Me, Windows 2000Advanced Server/Professional or Windows NT Server 4.0/Work-station4.0, Windows XP running TCP/IP or IPX/SPX (NetWare).This utility can only be used on a PC that can be connected to the networkwith TCP/IP or IPX/ SPX and must be used on a PC that is located in thesame segment as the printer.