39 • Configuring your machineFax set upYour MFP has to be set up properly to allow faxing from the machine. The followingparameters must be set before using the fax function:• Date and time• Country code• Local phone number• Sender IDSee “Initial set up” on page 61 for details.Network set upThe MFP must also be set up properly on your network to perform scan to e-mail andother functions. In order for other network devices to find the MFP on the network,the following network parameters have to be set.1. IP Address Set:2. IP Address:. . .3. Subnet Mask:. . .4. Gateway Address:. . .5. DNS Server:. . .6. SMTP Server:. . .7. SMTP Port:258. POP3 Server:. . .9. POP3 Port:110Explanation:1. IP Address Set:Choose Auto to obtain IP/subnet/gateway addresses automatically from DHCPserver. After changing setting from Manual to Auto, the MFP will automaticallyreboot the network card.2. IP Address:The Internet Protocol (IP) address assigned to your machine by your networkadministrator.NoteIf you ran the Oki driver installer program from the CD-ROM you mayhave already set the time zone, date and time (Windows only) via thePanel Language Setup utility.
