71 • Access Control4. Use the Up arrow key to highlight Done and press Enter to confirm.Logging outWhen you have finished using the machine, make sure you log out:1. Using the Down arrow key, highlight Logout and then press Enter.The Confirm Logout screen is displayed.2. Using the Down arrow key, highlight Yes and then press Enter to confirm.The display reverts to the Enter PIN screen.Operation time-outWhen the MFP control panel is left inactive for a prescribed length of time(Operation Time-out), the display automatically reverts to the idle screen if AccessControl is disabled.If an error state occurs, Operation Time-out is disabled.After Operation Time-out, the display automatically reverts to the Enter PINscreen if Access Control is enabled.The length of the Operation Time-out depends on the setting in Menu Mode >Admin Setup > System Setup > Return to Standby Time.NoteWith Access Control enabled, Logout options are displayed in theMenu on the Mode Selection screen.NoteWhen the MFP control panel is left inactive for a prescribed length oftime, the display automatically reverts to the Enter PIN screen ifAccess Control is enabled.
