41285901TH Rev.3 104 /1.6.24 Output Conditions of Various MCF Reports During Transmission1.6.24.1 Difference from OKIFAX5700/5900• Describes the results of broadcast transmission to respective addresses to the ActivityReport.• One-line description of “MODE=B.C. RESULT=COMP” used to be made to the Activity Reportis cancelled.• MCF (specifications for Germany) used to be output for each address in the broadcasttransmission is cancelled.• When making output of the latest report on the transmission result by pressing ENTER keyduring standby, if backup should be interrupted after turning the power ON, data retrieval willbe made from the Activity Report. To this end, result of the broadcast transmission to the lastaddress is described to the Activity Report.1.6.24.2 Reports to be output when queuing for communication is cancelledAutomatic Output ReportSettingItemNo.Image in MCF SettingDescribed togetherwith MCF (MULTI)(with picture)BROADCASTEach AddressERR.REPMCF(MULTI)MCF(SINGLE)ON OFFMCFMCFMCFwithpictureDelayed Broadcast(No call origination for all theaddresses)Standby of redial for Broadcast(Already call origination for someaddress)During multiple wait of Broadcast(Already call origination for someaddress)Delayed single location memory1 — ON ON (B.C.STOP)2 — OFF ON (B.C.STOP)3 — ON OFF (B.C.STOP)4 — ON ON (B.C.STOP)5 — OFF ON (B.C.STOP)6 — ON OFF (B.C.STOP)7 — ON ON (B.C.STOP)8 — OFF ON (B.C.STOP)9 — ON OFF (B.C.STOP)10 ON — — —ON11 ON — — —OFF12 OFF — — —ONSingle location memory:Standby of redial13 ON — — —ON14 ON — — —OFF15 OFF — — —ONDelayed single location (Feeder) 16 ON — — —ON17 ON — — —OFF18 OFF — — —ONSingle location from Feeder:Standby of redial19 ON — — —ON20 ON — — —OFF21 OFF — — —ONFirst read TX 22 ON — — —ON23 ON — — —OFF24 OFF — — —ON
