41285901TH Rev.3 40 /1.6.3 Help ReportOutput the following new report by pressing HELP key while the device is in standby state.Following this report, output conventional function list. (4 sheets in total)1.6.3.1 Report Image (Conditions for descriptions)(1) If the line for descriptions is in blank, don’t move up descriptions in the following lines.(Keep the blank line blank.)HELP REPORT12/24/2000 22:00ID=Odc TakasakiHELP GUIDE FOR KEY FEATURES - REFER TO USER GUIDE FOR MORE DETAILEDNOTE: NAVIGATE TO MENU SETTINGS USING THE SHIFT KEY1:PROGRAM SPEED DIAL NUMBERSMENU -> NAVIGATE TO LOCATION PROGRAM -> ENTER -> SELECT SPEED DIAL ->ENTER -> SELECT SPEED DIAL NUMBER -> FOLLOW LCD PROMPTS -> ENTERNOTE: TO PROGRAM A TELEPHONE NUMBER AT THE TIME OF SENDING THEDOCUMENT INTO THE FIRST AVAILABLE SPEED DIAL LOCATION:INSERT DOC -> ENTER TELEPHONE NUMBER -> ENTER -> CONFIRM THE SPEEDDIAL LOCATION -> ENTER -> FOLLOW STEPS TO ENTER LOCATION DETAILS-> PRESS START TO SCAN DOCUMENT.2:PROGRAM GROUPSMENU -> NAVIGATE TO LOCATION PROGRAM -> ENTER -> SELECT GROUP ->INPUT GROUP NUMBER -> ENTER -> SPEED DIAL -> ADD SPEED DIAL LOCATIONS-> ENTER -> REPEAT UNTIL ALL LOCATIONS ARE SELECTED -> START -> ENTERGROUP NAME ON ONE-TOUCH KEYPAD -> PRESS START3:SENDING A FAX TO MULTIPLE LOCATIONS (BROADCAST)1:SENDING TO A GROUP:INSERT DOC -> SELECT RESOLUTION -> PRESS SPEED DIAL KEY -> SELECTGROUP BY PRESSING # KEY FOLLOWED BY THE GROUP NUMBER -> ENTER-> ENTER TO CONFIRM -> PRESS START2:BROADCAST SEND:INSERT DOC -> SELECT RESOLUTION -> (SELECT OT/SPEED DIAL/KEYPAD ->ENTER -> REPEAT UNTIL ALL LOCATIONS ARE SELECTED -> PRESS START4:SENDING A FAX A SINGLE LOCATIONINSERT DOC -> SELECT RESOLUTION -> SELECT OT/SPEED DIAL/KEYPAD/PRESSSEARCH -> CONFIRM LOCATION -> PRESS START5:COPYINGINSERT DOC -> SELECT RESOLUTION -> START -> ENTER NUMBER OF COPIES-> PRESS START6:DELAYED FAXINGINSERT DOC -> SELECT RESOLUTION -> MENU -> NAVIGATE TO DELAYED TX ->ENTER DATE AND TIME -> SELECT LOCATION -> ENTER -> PRESS START7:FUNCTION SETTINGS (REFER TO FOLLOWING PAGES FOR FUNCTION LIST)MENU -> NAVIGATE TO SETUP -> ENTER -> NAVIGATE TO MACHINE SETUP ->ENTER -> NAVIGATE TO FUNCTION -> ENTER8:REPORT PRINTINGMENU -> NAVIGATE TO REPORT PRINT -> ENTER -> NAVIGATE TO REQUIREDREPORT -> ENTER9:MESSAGE CONFIRMATION REPORT1:SET USER FUNCTION 70 AND 71 TO ON (FOR AUTO PRINT AFTER EACH TX)2:AFTER TRANSMISSION IS COMPLETE -> ENTER -> LCD DISPLAY -> ENTER TOMANUALLY PRINT OUT REPORT FOR LAST COMMUNICATION
