41285901TH Rev.3 97 /1.6.17 Broadcast Confirmation ReportMethod:The report will be manually or automatically printed out.Descriptions:1. Title of the report2. Date and time when the report was printed3. Sender ID4. Total numbers of pages in particular communication5. Specified transmission time(Time is not printed by automatic print out mode.)6. Total transmission time7. Required transmission address (Speed dial)8. Registered location ID (Speed Dial) or Identification of the remote station.9. Required transmission address (Ten key dial)10. Transmitted number or pages for each address11. Identification of the result of communicationDescriptions enabled of Email address for Internet FAX and Fax2Net specified to Speed Dial001 to 040 and LOCATION ID column of the keypad.• Character string containing the lower-case alphabetic characters and symbols• Speed Dial: Descriptions of maximum 24 characters. If exceeding 24 characters,description starts from the top.Keypad: All 64 characters enabled• Since simultaneous transmission of Internet FAX effects transmission to respective ad-dresses at one time, the result will be either all OK or failure (NG).1.6.18 Relay Broadcast Entry ReportWhen the relay personal box is opened, the relay broadcast entry report can be output in thespecified operation of the delivery address. (Format is the same as the conventional broad-cast entry report but the following description only deffers.)12/24/2000 19:19ID=ODCPERSONAL BOX = 10LOCATION ID LOCATION ID1 = 1234567890123456789012345678901234567890 10 = OKI DATA20 = ODSRELAY BROADCAST ENTRY REPORTPersonal Box No. is described.1.6.19 G3 Log ReportNewly outputs debug log information by the firm of G3 option board.Report format is identical with MCNT and the log information by the firm of G4 option.
