– 6 –11-3. USB Interface ModelON ONOFF OFFDIP-SW Switch Function ON OFF- Command emulation (Ster Line mode) Always ON- Should not be changed (Should be set to on)- Should not be changed (Should be set to on)- Sensor adjustment Invalid Valid- USB mode Printer class Vendor class-6 Handshaking conditions (conditions forBUSY)Offline or receivebuffer fullReceive buffer full- Automatic status back function * Invalid Valid- Should not be changed (Should be set to on)- Low-power consumption mode Invalid Valid-0 Should not be changed (Should be set to on)* Automatic status back function is disabled when USB mode is Printer Class (switch - =ON).The factory settings of DIP switch are all on.DIP-SW Switch Function ON OFF-~- Always ON Should be set to onThe factory settings of DIP switch are all on.No. 1 2 3 4 5 6 7 8 No. 1 2 3 49 10DIP-SW 1 DIP-SW 2
